Manufacturing instructions from HRD templates for tube lamps and cone lamps
A Do it Eye Catcher tube is a tube lamp made from a printed HRD template and is very easy to make yourself. Slide the adhesive or staple tab under the picture. If the inner edge of the adhesive tab is exactly in line with the edge of the picture, the adhesive tab can either be glued with an all-purpose adhesive or stapled twice with small staples (No. 10) at the bottom and top with a little distance (quicker and easier). If used for table lamps with cables, the colored triangle (at the bottom of the picture edges) at the bottom edge of the adhesive should be cut out with scissors after gluing.
A Do it eye catcher cone is a cone table lamp or lampshade made from a printed HRD design cone template. The production is simple and requires little technical skill. The more accurately you cut out an HRD template in short cuts, the more beautiful the lamp or lampshade will be. When the template is finished cutting out, slide the adhesive or staple tab under the image. If the inner edge of the staple tab is exactly in line with the edge of the picture, the adhesive tab can either be glued with an adhesive or stapled twice with small staples (No. 10) in the curves at the bottom and top with a little distance (quicker and easier). Neatly glued finished lamps or lampshades look best. Everyone can adopt their favorite DIY technique. Carefully follow the following pictures below of the production, then you will have a perfect lampshade for a great table lamp or a great room decoration.
Private information websites from Label HRD-Designs by Hermann R. Deml, digital designer and game designer from hrddesigns.com and doitboardgames.com
do it board games and currently 120 free HRD downloads.
